

Why the stove is doing that
Common problems
guides.
What your stove is telling you when it goes completely dead, a burner sticks on high after the knob is off, or the clicking carries on long after the flame has caught.
Mon–Sat, 8am–8pm
- Three guides
- Read before you book
- Says where to stop
Book a visit
Three short steps, about a minute.
or call (844) 415-7620
Loading appointment form…
The appointment form couldn’t load. Please try again.
Common problems,
guide by guide.
Start here when the stove is doing something it did not do last week: a panel that stays dark, a burner that refuses to turn down, a steady ticking from the knobs. Each guide in this section begins with what you can see and hear standing in front of the stove, and works back to the handful of causes that explain it, most likely first.
All 18 guidesWhy the stove is doing that.
The guides cover gas, electric coil, smooth glass and induction stoves side by side, because the same complaint has different roots on each. A clock that runs while nothing heats means one thing on an electric stove and something else on a gas one, and a clicking sound can be perfectly normal or a switch asking for attention.
Some of these problems are urgent. A burner stuck at full heat, a flame that will not go out or any smell of gas is covered in the first lines of the relevant guide, before any explanation, so the safe move is always the first thing you read.
Not sure where to start?The short answerWhy my stove won't turn on: dark panel, cold burners or a silent oven
When a stove won't turn on, first note what still works: a dark panel points to the breaker or the plug, a lit clock with cold burners points to half a breaker or a wiring issue, and a panel that answers but will not heat often has a lock, Sabbath or demo setting active before any part has failed.
The short answerWhy a stove burner stays on high, and how to stop it first
When a stove burner stays on high whatever the knob says, cut the heat first: on an electric stove switch off both handles of its breaker, on a gas stove turn the knob off and call the gas utility if the flame keeps burning.
The short answerWhy the stove keeps clicking with the knobs off, lit or baking
When a stove keeps clicking, the timing tells the story: ticking with every knob off usually means a knob not fully off or water in a switch after cleaning, ticking beside a steady flame after the knob is turned to a setting needs service, and soft clicks or a small poof from a gas oven as it cycles are normal.
When reading
is not enough.
If the checks in these guides did not settle it, the visit picks up from there, stop by stop.
What repairs cost- 01The stove, tried the way you use it
- 02A number before the work
- 03Common stove parts already on board
- 04Put back, then cooked on
The problems
these answer.
Each has a page of its own, with the causes in the order worth checking.
All 17 problems
Questions about
common problems.
How do I tell a stove problem that can wait from one that cannot?
Are these guides written for one brand of stove?
What should I have ready before reading one of these guides?
The other
sections.
Split by what you are trying to find out rather than by which part of the appliance it concerns.
All guidesBack to your everyday
Let’s get your stove working again.
Three short steps online, or one call. Tell us what you are seeing and pick a window that works.