The top edge of a stove's oven door and the latch opening in the frame above it, the door closed flush and the stovetop burners off overhead.

GE Profile stove
showing FC

FC on a Profile means the control found a problem somewhere in the door lock circuit, the latch that locks the oven during self-clean.

(844) 415-7620

Mon–Sat, 8am–8pm

  • Door lock
  • Stove door and hinge repair
  • Source: GE Profile

Book a visit

Three short steps, about a minute.

or call (844) 415-7620

Before you book,
in this order.

Each step comes from GE Profile's own guidance for FC on its stoves. Follow it to the end: the last card says whether this is a visit.

01

Make sure the oven is cool; the door stays latched while it is hot.

02

Press Cancel/Off, then cut power for at least 30 seconds.

03

If FC remains or the door will not unlock, book a visit instead of forcing it.

Still there?

It usually turns into stove door and hinge repair. Book with the code and the model number.

What not to do

FC is not the normal DOOR LOCKED light that stays on while the oven cools after a clean. That light clears by itself; FC is a failure report.

What you may
notice with it.

The stove problems FC tends to arrive with. Answer these at the stove before anyone is booked.

All problems

Where FC usually leads

Stove door and hinge repair.

Oven door hinges, seal or lock · low.

In GE Profile's own words

This code usually means that a component has failed somewhere in the door lock circuit.
GE Appliances support: oven error and function code list GE Profile owner's manual 49-2000990, induction front-control models

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. GE Profile stoves with electronic oven controls. The number comes from GE Appliances' shared code list; Profile manuals print only "F— and a number or letter" and send you to that list.

GE Profile FC stove repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A grandparent and a child stirring a pot together on a white gas stove in a lived-in family kitchen
For the heart of your home.

Questions
about FC.

Can I clear FC myself?
Make sure the oven is cool; the door stays latched while it is hot. If it comes back, it needs a visit.
My Profile shows FC and the oven door is stuck shut. What should I do?
Let it cool, reset the power, and try again. If it stays locked, the latch needs to be released and tested on a visit.
Can FC on a Profile happen when using steam clean?
Steam clean does not lock the door the way self-clean does, but the lock circuit is still checked. FC can appear whenever the control tests it.
Is FC on a Profile related to F9 on a GE?
Yes. GE gives FC and F9 the same meaning, a failed part in the door lock circuit.

Back to your everyday

Still showing FC?

Book with the code written exactly as the stove shows it, the full model number, and whether you notice any smell of gas or hot wiring — when there is a code, that is where the diagnosis starts.

(844) 415-7620 Schedule a repair