The top edge of a stove's oven door and the latch opening in the frame above it, the door closed flush and the stovetop burners off overhead.

Fisher & Paykel stove
showing A2

A2 on a Fisher & Paykel professional stove means the door lock could not engage after a Self Clean cycle was started.

(844) 415-7620

Mon–Sat, 8am–8pm

  • Door lock
  • Stove door and hinge repair
  • Source: Fisher & Paykel

Book a visit

Three short steps, about a minute.

or call (844) 415-7620

Before you book,
in this order.

Each step comes from Fisher & Paykel's own guidance for A2 on its stoves. Follow it to the end: the last card says whether this is a visit.

01

Cut power at the wall switch, restore it, and give the lock roughly 10 seconds to go back to where it starts.

02

Set the clock again if it was cleared.

03

Restart Self Clean with the door firmly closed; if A2 returns, book a visit.

Still there?

It usually turns into stove door and hinge repair. Book with the code and the model number.

What not to do

A2 is not a heating problem. Only the door lock is involved.

What you may
notice with it.

The stove problems A2 tends to arrive with. Answer these at the stove before anyone is booked.

All problems

Where A2 usually leads

Stove door and hinge repair.

Oven door hinges, seal or lock · low.

In Fisher & Paykel's own words

This will allow the door lock to return to its initial position.
Fisher & Paykel RDV3 professional dual-fuel user guide, Alert codes Fisher & Paykel RDV3 professional dual-fuel user guide, Alert codes

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Fisher & Paykel professional dual-fuel (RDV3) and induction (RIV) stoves with the touch display; both user guides print the same alert codes.

Fisher & Paykel A2 stove repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A grandparent and a child stirring a pot together on a white gas stove in a lived-in family kitchen
For the heart of your home.

Questions
about A2.

Can I clear A2 myself?
Cut power at the wall switch, restore it, and give the lock roughly 10 seconds to go back to where it starts. If it comes back, it needs a visit.
Why won't my Fisher & Paykel oven lock for self-clean?
A door that is not fully shut, a lock that stopped partway, or a failing lock motor can all bring on A2. Resetting power and closing the door firmly are the first steps.
Do I need to reset the clock after clearing A2 on my Fisher & Paykel stove?
Yes. Cutting the power at the wall can clear the clock, and the guide lists setting it as part of the fix.
Can I still bake if A2 keeps showing on my Fisher & Paykel stove?
Usually yes, since A2 concerns Self Clean. Book a visit for the lock before the next clean.

Back to your everyday

Still showing A2?

Book with the code written exactly as the stove shows it, the full model number, and whether you notice any smell of gas or hot wiring — when there is a code, that is where the diagnosis starts.

(844) 415-7620 Schedule a repair