A freestanding stove pulled out from the wall with its back panel taken off, the green control board and its bundle of wires exposed behind the display.

Fisher & Paykel stove
showing F

An F followed by a number on a Fisher & Paykel professional stove is a technical alert.

(844) 415-7620

Mon–Sat, 8am–8pm

  • Control board and power
  • Control board and display repair
  • Source: Fisher & Paykel

Book a visit

Three short steps, about a minute.

or call (844) 415-7620

What F
actually means.

An F followed by a number on a Fisher & Paykel professional stove is a technical alert. The guide does not break the numbers down; it tells you to note the code, let the oven cool and turn it off at the wall.

Fisher & Paykel stove display · also shown as F + number

What to do when F shows on the stove

Before you book,
in this order.

Each step comes from Fisher & Paykel's own guidance for F on its stoves. Follow it to the end: the last card says whether this is a visit.

01

Write down the full code, the F and its number.

02

Once the fans have gone quiet and the oven is cold, switch it off at the wall.

03

Book a visit and have that code ready when you do.

Still there?

It usually turns into control board and display repair. Book with the code and the model number.

What not to do

An F code is not something the owner can clear. A1, A2 and A3 have owner steps; F codes go to service.

What you may
notice with it.

The stove problems F tends to arrive with. Answer these at the stove before anyone is booked.

All problems

Where F usually leads

Control board and display repair.

Control board, keypad or display · moderate.

In Fisher & Paykel's own words

Note down the alert code.
Fisher & Paykel RDV3 professional dual-fuel user guide, Alert codes Fisher & Paykel RDV3 professional dual-fuel user guide, Alert codes Fisher & Paykel RIV professional induction user guide, Alert codes

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Fisher & Paykel professional dual-fuel (RDV3) and induction (RIV) stoves with the touch display; both user guides print the same alert codes.

Fisher & Paykel F stove repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A grandparent and a child stirring a pot together on a white gas stove in a lived-in family kitchen
For the heart of your home.

Questions
about F.

Can I clear F myself?
Write down the full code, the F and its number. If it comes back, it needs a visit.
What does F followed by a number mean on my Fisher & Paykel stove?
It is a technical alert that the user guide groups together. The number tells the technician where to look, so write it down.
When should I turn my Fisher & Paykel stove off after an F code?
Only once the cooling fans have stopped and the oven is fully cool. Switching off while it is hot can damage the oven and nearby cabinets.
Can I reset an F code on my Fisher & Paykel stove myself?
The guide gives no reset for F codes. It tells you to switch off at the wall once cool and arrange service.

Back to your everyday

Still showing F?

Book with the code written exactly as the stove shows it, the full model number, and whether you notice any smell of gas or hot wiring — when there is a code, that is where the diagnosis starts.

(844) 415-7620 Schedule a repair